| Brend | Two-Winged Wolf God |
| Material | Plastik |
| Mənşə yeri | Dongguan |
| Custom Processing | No |
| Növ | Sound-based reversing radar |
| Model | NY3002-4- # 202 |
| Applicable Vehicle Models | Varsayılan məhsul |
| Enerji təchizatı gərginliyi | 12V |
| Zonlama | 12V |
| Alarm notification | Yoxdur |
| Aşkarlama diapazonu | 30 dərəcə |
| Xatırlatma növü | Səs siqnalı |
| Çəki | 420 qram |
| Məhsul nömrəsi | NY3002-4- # 202Black- |
| Rəng | Qara |
| Rəng | Ağ |
| Rəng | Gümüşü |
| Əsas aşağı axın platformaları | eBay |
| Əsas aşağı axın platformaları | Amazon |
| Əsas aşağı axın platformaları | AliExpress |
| Main sales regions | Avropa |
| Main sales regions | Cənubi Amerika |
| Main sales regions | Şimali Amerika |
| Is it a source of goods exclusively for cross-border exports? | Bəli |
Sensor Installation Requirements 1: Rear installation height must exceed 50 cm . 2: Ensure the sensor surface is perpendicular to the ground. Critical Note: The sensor must not detect the ground. Error 1: Height less than 50 cm Error 2: Surface not perpendicular to the ground Error 3: Surface tilted
Working principle of the product: When the product is working, the sensor emits ultrasonic waves. When encountering an obstacle, the ultrasonic waves are reflected. The sensor receives the reflected signal and transmits it to the control box. Through calculation, the control box obtains the distance between the vehicle and the obstacle, and reminds the driver to pay attention through the display and sound, etc., to avoid danger. It is a good helper for us to drive the car!
Product parameters 1>Specifications: 2>Rate voltage: 9V~14V DC 3>Rate operating range: 10.5V - 16V DC 4>Rate current: 100mA - 300mA 5>Ultrasonic frequency: 40KHz 6>Control moudle working temperature: -30 - 80 celcius degree 7>Display working temperature: -20 - 70 celcius degree 8>Sensor diameter: 16.5mm 9>Installation mode: Drilling Alarm sound: beep The box is specially designed to lock the wires tightly and avoid bad contact due to vibration of the car!
OUR PARKING SENSORS Double Angle - horizontal and vertical simultaneous scanning probe! Package includes: 1 x Control Box 4 x Parking Sensors 4 x Sensor extension cables 2.3M 1 x Power Cable 1 x Hole Saw 1 x Buzzer 1 x User manual
Legal Disclaimer This product is designed as an **parking aid** and must be used with caution. Users are solely responsible for: 1. Maintaining full awareness of their surroundings while operating the vehicle. 2. Complying with all applicable traffic laws and safety regulations. The manufacturer disclaims all liability for any accidents, damages, or losses arising from: - Improper installation, misuse, or neglect of this device. - Reliance on this product as a substitute for human judgment during driving. Note: Regular inspection of wiring connections (including ACC+, reverse light, brake light, and ground terminals) is required to ensure proper functionality.
