Launch X431 V 5.0 PRO3 Diagnostic Tool Car Computer Diagnostic Tester

产品图片展示

产品英文介绍（Product introduction in English）

2024 Launch X431 V+ 5.0 PRO3 Diagnostic Tool Supports Topology Mapping ECU Online Coding & 37+ Services AutoAuth FCA SGW Add CAN FD Protocols

ID NO.: CTL033

Product Description

1. 2024 Launch X431 V+ 5.0 PRO3 Diagnostic Tool Supports Topology Mapping ECU Online Coding & 37+ Services AutoAuth FCA SGW Add CAN FD Protocols
2. Support wifi/bluetooth and one click update, make your update job much easier.
3. Contain 72 car brand from USA, European, Asia and so on.

2024 Launch X431 V+ 5.0 PRO3 Elite Diagnostic Tool Supports Topology Mapping ECU Online Coding & 37+ Services AutoAuth FCA SGW Add CAN FD Protocols
Launch X431 V+ PRO3 is a high cost-effective automotive diagnostic device developed based on Android 9.0 System. It adopts Android 9.0 System, 8-core 1.8GHz processor, which runs faster and more stable. It is equipped with DBSCar IV connector as standard, which can be directly inserted into the slot of the host connector, easy to use and not easy to be lost. X-431 V+ V4.0 can cover more than 98% of the car models in the market, realize the fault diagnosis of the whole system, and has many advantages such as strong diagnosis function and accurate test data.

Launch X431 V+ V5.0 PRO3 Highlights:
1. Extensive vehicle coverage, powerful diagnostic functions, and precise test result.
2. Equipped with DBSCar IV connector as standard, which can be directly inserted into the slot of the host connector, easy to use and not easy to be lost.
3. One-Click Update via Wi-Fi, 2 Years Free Update Online
4. Supports remote diagnosis.
5. Supports frequently 20 used special function.
6. No Software download IP limitation: Oversea download and update available
7. Supports expansion module: endoscope, immobolizer programmer and Wi-Fi printer. (purchased separately)
8. Supported Multi-Languages: English, Spanish, Portuguese, Arabic, French, Korean, Japanese, German, Russian
Notice: For 2017 and later FCA Vehicles with Secure Gateway Module (SGW): Register with AutoAuth to enable your LAUNCH V+ scan tool to communicate with the 
FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directional without using a bypass cable.
Launch X431 V+ V5.0 PRO3 Function List:
Full-System Diagnoses
The diagnostic scanner X431 V+ V5.0 PRO3 enables you to scan full control units for a number of cars such as Engine, ABS, SAS, Transmission, Fuel system, Emission system, Body, and so on. Therefore, there is no need to buy other tools for diagnosing systems, saving you much time and money from the long term.Automatically identify VIN upon connection to the vehicle for intelligent diagnosis.Read all OTC types for full system, view, graph and record data PIDs, support bi-directional controls, actuation test and all other diagnostic functions.

Active Test & ECU Coding
Active Test
This diagnostic tool LAUNCH X431 V+ 5.0 PRO3 supports active test (Bi-directional control) to request information or command a module to perform specific tests and functions. For instance, in the case of OBD II generic information Mode 1, you can initiate a request for information from the powertrain control module, and the PCM responds by sending the information back to the scan tool for display. This LAUNCH X431 V+ 5.0 PRO3 also have the ability to actuate relays, injectors, coils, or perform system tests, etc.
ECU Coding
Because every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 V+ is equipped with advanced ECU coding function for addressing the following issues:
1. After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
2. By changing the code with the ECU coding, it’s easy to improve vehicle performance or stimulate high-end functions for the car.
3. ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.

20 Commonly-Used Service Functions
OIL RESET– Reset the oil life systems every time the oil and oil filter are changed;
INJECTOR– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed;
BRAKE RESET– Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.;
SAS RESET– Perform steering angle sensor calibration and clear records;
BAT.RESET– Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.;
BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity;
ELEC.THROTTLE RLRN– Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state;
TPMS RESET– Tire pressure resetting is required to be performed after maintenance is performed;
DPF REG– Clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode to stabilize the filter performance;
GEAR LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced;
KEY PROGRAMMING – Help ECU to recognize the new keys when you need to add new keys.
ABS / SRS / Transmission / Engine Reset
AFS / EGR / GEARBOX / SUSPENSION / SUNROOF Reset

Launch X431 V+ V5.0 PRO3 Vehicle Coverage:
Launch X431 V+ PRO3 scan tool can diagnose electronic control system of prevailing vehicle models covering Asian, European, American, China, up to 108+ car brands, up to 10000+ car models.

Launch X431 V+ PRO3 Reviews:
1. Great control of vehicle diagnostics a little more start up instructions for us non nerds, limiting vehicle coverage for just most north american brands and allowing the option to expand for the rest so to lower the cost of the original unit would make this scanner more approachable.
2. I was in search for a OE level scan tool for my father who has an automotive shop is Mexico. I did several research and found many scan tools out their with OE level diagnostic capabilities but I needed something that not only would work with vehicles sold in the USA but also vehicles from Latin America since they do offer different models. I found that all scanners/computers had the capabilities of reading DTC, scan, graph but the Launch x431 pro 3 v 2.0 had a much broader coverage of not only the basic capability's and over 100 vehicle makes and models but also has transmissions, ABS, SRS, Body control module, Suspension, infotainment, TPMS, key programming and much more all in one tool, plus it had capabilities of other languages and functionality in many other country's which my concern was Mexico so this scanner covered all of our needs.
3. Got this and so far its done what was expected happy with it used to replace a aultel maxs908p because the cost to update it is close to this cost. Found a special at under 1000.
Launch X431 V+ V5.0 PRO3 FAQs:
Q1: What is difference between launch x431 v and launch x431 v+ PRO3?
A1: The differences are as below:
1. The screen size of LAUNCH X431 V+ (10.1 inches) is larger than V(8 inches). One screen can display 15 data stream (Graphic and textual), three more than V, which is easy to navigate.
2. You can use LAUNCH X431 V+ longer and avoid frequent charging, because its battery life is 1.6 times that of V.
3. LAUNCH X431 V+ equipped with more diagnostic cables than V. so the compatible vehicle models of LAUNCH X431 V+ are broader.
V+ is compatible with LAUNCH X431 heavy duty modules (need to be purchased separately) and becomes a diesel-integrated diagnostic device with more powerful functions. V is not compatible with heavy-duty module.

Q2: Does this tool offer super car diagnostics?? ferrari, maserati, lamborghini??? clutch pid, service reset etc
A2: This tool can test ferrari, maserati but not lamborghini, it can not only do clutch pid, service reset these basic function on your ferrari, maserati, but also can do such as battery reset, brake reset, oil reset, ABS bleeding, throttle adaptation, TPMS reset, DPF regeneration, gear learning and IMMO, etc.

Q3: Will this scanner work on a ford 7.3 diesel motor?
A3: i have the x431 vplus with the heavy duty and I use it on the ford with the cummings I can use it on the 7.3 but like I said I have the x431 plus with heavy duty for me the little extra coast for the heavy duty was worth it.

Launch X431 V+ V5.0 PRO3 Product Parameters:

CPU: 4-core 2.0 GHz
RAM: 4G
ROM: 64G
Battery Capacity: 6300mAh(200.85g) 7.6V
Android version: Android 10.0
Screen size: 10.1 inch
Screen resolution: 1920*1200
Wifi: 2.4 & 5 GHz
Camera: Rear 8.0MP/ Front 5.0MP
Communication: VCI/ Bluetooth(DBSCar VII)
Launch X431 V+ V5.0 PRO3 Package List:

1pc x Launch X431 V+ V5.0 PRO3 Tablet
1pc x DBSCar VII diagnostic connector
1pc x Power adapter
1pc x OBD main cable
1pc x USB cable
1pc x BENZ-38 connector
1pc x BENZ-14 connector
1pc x NISSAN-14+16 connector
1pc x BMW-20 connector
1pc x CHRYSLER-6 connector
1pc x FORD-6+1 connector
1pc x GM/VAZ-12 connector
1pc x HONDA-3 connector
1pc x KIA-20 connector
1pc x MITSUBUSHI/HYUNDAI-12+16 connector
1pc x TOYOTA-17 connector
1pc x TOYOTA-22 connector
1pc x Double clamp power line connector
1pc x The cigarette lighter connector
1pc x UK standard conversion head
1pc x EU standard conversion head
1pc x US standard conversion head
1pc x Password envelope
1pc x Manual
1pc x Quick start

产品中文介绍（英译中-谷歌翻译）

Launch X431 V+

ID NO.: CTL033

产品说明

1. 2024年启动X431V+5.0Pro3诊断工具支持拓扑映射ECU在线编码和37+服务自动化和自动化框架(OXOUTUW)添加CANFD协议
2. 支持Wifi/蓝牙和一次点击更新,使您的更新工作更容易。
3. 拥有美国、欧洲、亚洲等72个汽车品牌.

2024年启动X431V+5.0先进诊断工具,支持拓扑映射ECU在线编码和37+服务的自动化和自动化框架(SAN)。
X431V+Pro3发射  是一种高成本效益的汽车诊断设备开发基于安卓9.0系统。它采用安卓9.0系统,8核心1.8GZ处理器,运行更快,更稳定。它配备了标准的DBCAARIV连接器,可直接插入主机连接器的插槽,使用方便,不易丢失。X431V+V4.0可覆盖市场上98%以上的汽车模型,实现整个系统的故障诊断,具有诊断功能强、测试数据准确等优点。

Launch X431 V+ V5.0 PRO3 Highlights:
1.车辆覆盖面广,诊断功能强,测试结果准确.
2.配备DBCAARIV连接器作为标准,可直接插入主机连接器的插槽,使用方便,不易丢失。
3.通过Wi-Fi点击更新,2年免费在线更新
4.支持远程诊断。
5.支持经常20用特殊功能.
6.无软件下载IP限制:可在海外下载和更新
7.支持扩展模块:内窥镜,栓塞器程序员和Wi-Fi打印机。(单独购买)
8.支助的多种语文: 英语、西班牙语、葡萄牙语、阿拉伯语、法语、韩语、日语、德语、俄语
注意: 为2017年和以后的FCA车辆与安全网关模块:注册到奥华思,使您的启动V+扫描工具与 
FCASGW认证系统和绕过SGM,以便执行诊断和双向而不使用旁路电缆。
发射X431V+V0.5Pro3功能清单:
全系统诊断
诊断扫描仪X431V+V0.5Pro3使你能够扫描许多汽车的完全控制单位,如发动机,澳大利亚统计局,斯洛伐克统计局,变速器,燃料系统,排放系统,车身,等等。因此,没有必要购买其他诊断系统的工具,从长时间内节省大量的时间和金钱。在连接到智能诊断车辆时,自动识别VIN。阅读完整系统的所有OTC类型,查看,图表和记录数据点,支持双向控制,驱动测试和所有其他诊断功能。

主动测试和ECU编码
主动试验
这个诊断工具启动X431V+5.00Pro3支持主动测试(双向控制),以请求信息或命令模块执行特定的测试和功能。例如,在obdII通用信息模式1的情况下,您可以从动力系统控制模块启动信息请求,而PCM通过将信息发送回扫描工具以供显示来响应。此发射X431V+5.0Pro3也有能力启动继电器,注入器,线圈,或执行系统测试等。
电子邮件编码
因为每个汽车执行机构都有一个ECU的记录代码,这是汽车计算机调动其工作的基础。发射X431V+配备高级ECU编码功能,以解决以下问题:
1.在更改坏执行器或某些部件后,您需要使用此函数来生成新代码并识别新执行器。
2.通过使用ECU编码修改代码,可以很容易地提高车辆性能或刺激汽车的高端功能。
3.ECU编码使多个汽车系统能够相互识别,执行器就可以开始工作。

20个常用服务职能
油重置 -每次更换油和油过滤器时重置油寿命系统;
注射器 -在安装新的注射器或完成更换后,对新的注射器编号进行编码,以替换以前的注射器编号;
制动器重置 -关闭和激活制动控制系统,协助控制制动液,打开和关闭刹车片等。;
SAS重置 -进行转向角传感器校准和清晰记录;
重设电池 -评估电池充电状态,监控闭路电流,记录电池更换情况等。;
流血的 -当车内有空气时,必须进行车内流血功能,以使车内制动系统出血,恢复车内制动灵敏度;
选举......封闭... -初始化节流阀驱动器,使存储在ECU上的"学习到的"值返回到默认状态;
重新设定 -在进行维修后,必须进行轮胎压力重置;
dpp条例 -通过连续燃烧氧化方式从三氯化铁过滤器中清除颗粒物,以稳定过滤器的性能;
齿轮学习 -在发动机ECU、曲轴位置传感器或曲轴飞轮被更换时,为汽车进行齿轮学习;
关键编程 -当您需要添加新键时,帮助ECU识别新键。
自动化系统/自动化系统/变速器/发动机重置
美国空军/埃及空军/变速箱/悬架/天窗重置

Launch X431 V+ V5.0 PRO3  车辆保险:
发射X431V+Pro3扫描工具,可以诊断亚洲、欧洲、美国、中国等国家流行汽车型号的电子控制系统,最多108个汽车品牌,最多10000个汽车型号。

X431V+方案审查:
1.对车辆诊断的大控制,对美国非书呆子来说,更多的启动指令,限制大多数北美品牌的车辆覆盖范围,并允许其他品牌的选择扩大,以降低原设备的成本,这将使这台扫描仪更易于接近。
2.我在为我父亲寻找一个OE级扫描工具,他在墨西哥开了一家汽车商店。我做了几项研究,发现许多扫描工具具有OE水平诊断能力,但我需要的不仅是美国销售的车辆,还有来自拉丁美洲的车辆,因为它们确实提供不同的型号。我发现,所有扫描仪/计算机都有读取DTC、扫描和图表的能力,但第431XPro3V2.0号发射机不仅覆盖基本能力和100多个车辆制造和型号,而且还包括变速器、ABS、SRS、人体控制模块、悬挂、信息娱乐、TPC、关键程序设计和更多的工具,此外,它还具备其他语言的能力和许多其他国家的功能。我担心的是墨西哥,所以这台扫描仪能满足我们所有的需求。
3.得到这个,到目前为止,它所做的被认为是满意的,用它来代替一个欧特尔马克908P,因为更新它的成本是接近这个成本。在1000岁以下发现了一个特别的。
Launch X431 V+ V5.0 PRO3 FAQs:
Q1:  发射X431V和发射X431V+Pro3有什么区别?
A1:  差异如下:
1.发射X431V+(10.1英寸)的屏幕尺寸大于V(8英寸)。一个屏幕可以显示15个数据流(图形和文本),比V多3个,这很容易导航。
2.你可以使用X431V+长时间发射,避免频繁充电,因为它的电池寿命是V的1.6倍。
3.发射X431V+配备了比V更多的诊断电缆。因此,X431V+的兼容飞行器模型更加宽泛。
V+与X431发射重型模块兼容(需要单独购买),成为具有更强大功能的柴油集成诊断装置。V与重型模块不兼容。

Q2:  这个工具提供超车诊断吗??法拉利玛莎拉蒂兰博基尼???离合器530、服务重置等
A2:  该工具可以测试法拉利,玛莎拉蒂,但不是兰博基尼,它不仅可以做离合器的530,服务重置这些基本功能在你的法拉利,玛莎拉蒂,还可以做电池重置,制动器重置,油重置,腹肌出血,节流调整,TPMS重置,DDF再生,齿轮学习和IMMA等。

Q3:  这台扫描仪能用在福特7.3柴油机上吗?
A3: 我有X431汽车,重载,我用它在福特和卡明斯,我可以用它在7.3号,但就像我说的,我有X431加重载,重载的小额外海岸是值得的。

发射X431V+V0.5Pro3产品参数:

中央处理单位:4核心2.0千兆赫
记录和档案管理:4克
ROM: 64G
Battery Capacity: 6300mAh(200.85g) 7.6V
机器人版本:安卓10.0
屏幕尺寸:10.1英寸
Screen resolution: 1920*1200
Wifi: 2.4 & 5 GHz
摄像机:后8.0MP/前5.0MP
通信:VCI/蓝牙(DBCAARVII)
发射X431V+V0.5Pro3包清单:

1PCX发射X431V+V0.5Pro3平板电脑
诊断连接器
1PCX电源适配器
1PCx大段主电缆
1PCxUSB电缆
1PCx贝茨-38连接器
1PCx贝茨-14连接器
1PCx尼桑14+16连接器
1pcxbmw-20接头
1PCx克莱斯勒-6连接器
1PCxFOD-6+1连接器
1pc x GM/VAZ-12 connector
1PCx霍达-3连接器
1pcx基-20连接器
1pc米苏西/现代-12+16连接器
1pcx丰田-17连接器
1pcx丰田-22连接器
1PCX双夹紧电源线连接器
1PCX型打火机接头
1PCx英国标准转换头
1PCx欧盟标准转换头
1PCx美国标准转换头
1PCX密码信封
手册
1PCX快速启动